MEPER blow molding machine repair and daily maintenance

Blow molding machine maintenance is an indispensable part of blow molding machine after long-term use. When the blow molding machine workers use the blow molding machine daily, they should pay attention to the maintenance and daily maintenance of the blow molding machine to ensure the normal operation of the blow molding machine.

 MEPER Blow molding machine repair and daily maintenance

1. Before starting each shift, lubricating oil must be added to each moving part.

2. Check whether the high-pressure air source, low-pressure air source, power supply, water source and all components are normal.

3. When the machine is running, it is necessary to pay close attention to whether the machine has abnormal noise. It is necessary to detect it early and stop it in time to solve it.

4. In case of emergency, press the emergency stop button to brake in an emergency. Then analyze the cause of the formation according to the on-site situation, and find the problem and solve it quickly.

5. After the machine is running normally, do not put any part of the body into the machine to avoid injury by the manipulator. If the machine has abnormal noise, it can be observed after slowing down.

6. After the machine is in normal production, the operator must always observe the quality of the bottle to avoid voltage fluctuation or other reasons affecting the quality of the blowing bottle.

7. When the blow molding machine is repaired, you can press the screen fault repair button to ensure safe maintenance. If you need to manually observe the movement of each cavity individually, pay attention to the position of the robot. At the same time, be sure to understand the role of the individual buttons, and then in the action. Make sure that misoperations cause unnecessary trouble.

8. After the blow molding machine is repaired, be sure to clean up tools and screws, so as not to leave them in the machine and affect the normal operation of the machine.