Call Us Today/WhatsAPP
(+86)-138-128-59969
English
Mould of extrusion blow molding machineMold manufacturing process is a complex process, from the design, processing, assembly, debugging and other steps, finally can be really put into use, in the whole life cycle, the factors affecting the quality of mold are mainly the following aspects: 1. The st
READ MORE
How to make the blowing machine do energy saving and environmental protection With the improvement and development of blowing technology, blowing technology has been widely used, and blowing products are becoming more and more common. Although the performance and quality of blowing machine are the k
READ MORE
Overload trip of frequency converter is one of the common problems in the operation process of blowing machine. The overload trip of the frequency converter should be treated by scientific and effective methods. This article will introduce the reasons and solutions of the inverter overload trip in d
READ MORE Before the extrusion blow molding machine formal start-up operation, the first test inspection to ensure that the equipment can normally complete the next production work, the test inspection work can be divided into two steps of the cylinder without heating test and cylinder heating test.I The cyli
READ MORE
The working principle of PP blow molding machine: similar to blowing bubbles, the first choice is to add resin to the extruder to melt it, pass through the annular hole to make a thin-walled round blank with closed ends, and then introduce compressed air to blow it. Sheet to desired thickness and wi
READ MORE
Notes on switching on and off of MEPER hollow blow molding machine: I Start-up precautions 1. Check the hydraulic oil level gauge of the blow molding machine and each hydraulic device to keep the oil level in each oil tank above the reference oil level. 2. The materials used in the extrusion blow molding machine must meet the necessary drying requirements, and additional drying is required if necessary.
READ MORE
