Views: 0 Author: Site Editor Publish Time: 2022-10-26 Origin: Site
What is the efficiency of large hollow blow molding equipment? It is the production efficiency of the equipment. In fact, the efficiency of the hollow blow molding equipment is mainly related to the performance of the equipment. As for what's relevant to the device, MEPER MACHINE won't disappoint.
According to the production level of most large plastic products, the production efficiency of large hollow blow molding equipment is 100-300 pieces per day.
The same kind of plastic products, with different hollow blow molding equipment to produce, the efficiency achieved is certainly different. If you want to achieve the production of products, you need to work on the selection of equipment.
How to choose the hollow blow molding equipment with high efficiency? How to work on it?
First of all, we should know that the key process of hollow blow molding equipment is which? Often the key process on the efficiency of equipment is very large.
In the processing process of hollow blow molding equipment, the heating process, process control process, motor supply, cooling process and so on play a key role. In the above process, we can save the processing time and improve the processing efficiency of a certain process on the basis of ensuring the processing effect, so as to realize the improvement of the efficiency of the whole hollow blow molding.
Here, MEPER Machinewill single out a few hollow blow molding process, respectively give relevant suggestions, you can refer to. Of course, just a suggestion, we should still choose according to their actual production situation.
The heating process
This process is the heating of raw materials. We should shorten the heating time to ensure the stable heating effect of raw materials, so as to improve the efficiency of the heating process.
Suggestion: Infrared heating or electromagnetic induction heating for hollow blow molding equipment, short heating time, but also to ensure a stable heating effect.
After finishing the heating process, Iyasu Xiaobian then tells you a process related to the heating process, that is:
The plasticizing process
This process takes place after the raw material is heated, and the raw material needs to be plasticized with the screw, and plasticized into the plastic embryo in the molten state. In this process, it is necessary to achieve complete melting of raw materials in a certain period of time, so the screw with high degree of coordination is needed.
Suggestion: Select screw with high plasticizing capacity, energy saving and strong conveying capacity, such as IKV screw, to ensure plasticizing effect, save plasticizing time and improve plasticizing process efficiency.
This refers to the control of hollow blow molding equipment and process. If the control effect is good, it can ensure that the whole production process is very smooth, and will not waste time because of the stop of a process. In addition to time, the control effect is good, and can ensure the stability of each process of the equipment.
Suggestion: For hollow blow molding equipment to choose a control system with stable control effect, you can consider PLC control system, although the cost is slightly higher, but there is no worry, on the contrary, it will bring long-term protection.