Views: 0 Author: Site Editor Publish Time: 2022-11-23 Origin: Site
Blow molding machine equipment has a service life, and the length of life depends on how to use it in the daily production process, so how to use the blow molding machine reasonably?
First of all, it is necessary to explain that the length of the working life of the blow molding machine, the level of production efficiency and the quality of the product are all related to the manufacturing quality of the equipment and the selection of equipment specifications. However, how to let the operator use the equipment reasonably and how to pay attention to the maintenance of the equipment is also directly related to prolonging the service life of the blow molding machine and the normal production efficiency of the blow molding machine. Therefore, in the daily use process, we try to do the following What time is it.
1. Reasonable use of supporting equipment, corresponding supporting equipment on the blow molding machine production line, the production capacity of each machine must match, and each equipment can fully play its role, so that all equipment on the production line can work in harmony. Oversupply or insufficient supply between the upper and lower processes, and stop waiting, all belong to unsuitable selection of equipment and unreasonable selection of specifications.
2. Select suitable production equipment. The choice of blow molding machine should be based on the specifications of the product. The specification and model of the blow molding machine should be selected. Using a large-size blow molding machine to produce smaller-sized products will increase power consumption and speed up the wear of the blow molding machine. , to increase the manufacturing cost of the product is a production plan that does not pay attention to economic accounting and is very wasteful.
3. Technical training for operators requires that operators not only have proficient operating skills, but also understand the structure, function of the equipment, the specifications and production capacity of processed products; at the same time, they should also know how to maintain the equipment. For the use of new workers, they must undergo technical training to let them memorize the equipment operating procedures; carry out practical operation training, and only after passing the examination can they work independently.
There is basically no need to worry about reaching these three points during the use of the blow molding machine, and there is basically no need to worry about damaging the service life of the equipment.