How to do the material stuck in the production process of MEPER blow molding machine?  

How to do the material stuck in the production process of blow molding machine?  Today, it is still a common problem in blow molding machine production. If the feed plate is stuck in the process of blow molding, how to deal with it correctly?  Let's solve it with xiaobian.  

MEPER blow molding machine

Blow molding opportunity to chuck problem is very headache, generally this situation may be because the length of the blow molding machine blank is long, the weight is also large, it will cause this problem, the need to control the discharge reduction.  

Another possibility is that the feeding position of the hollow blow molding machine is not feeding. In this case, we need to check whether there is still material in the hopper. If there is no material, we need to add materials immediately.  

MP70D extrusion blow molding machine

If this is not the case, check whether the control contactor of the progress machine is powered.  If it is the case that the hollow blow molding machine gets electricity, please check whether the motor is in power and load. The reason is that there is a great reason for this situation. It seems that the billet is stuck to the progress zone.  If it is detected that the control contactor of the hollow blow molding machine is charged, please check whether the electric eye of the bottle shell is not in the same line as the reflector plate.  

MP55D Extrusion blow molding machine

If the above two situations did not happen, we can see whether it is because there is no dislocation of the manipulator.