Matters needing attention when the chemical barrel blow molding machine is running

The chemical bottle MEPER blow molding machine is mainly used for blowing chemical barrels. It can blow plastic particles or preforms into bottles through technical methods, and use a variety of different shapes of chemical barrels in our lives. It brings convenience. The blow molding machine is mainly operated with oil-free airbag clamping technology, which not only has a large clamping force, but also has less force in the operation of the toggle and long life.

1. When we use the blow molding machine, we should carefully check whether the power supply, control system, heating system, etc. of the blow molding machine are in normal condition, and which ones need to be added with lubricating oil. normal operation of the press.

2. When running the blow molding machine, the mold should also be accurately installed on the blow molding machine, and whether the button is already in the correct position should be carefully checked, and it should be debugged or operated according to the specified requirements to determine the machine. Whether the device is working under normal conditions.

The specific operation process of the chemical barrel blow molding machine:

1. When running the blow molding machine, the preform should be placed in the preform container, and then in the machine, it will automatically enter the automatic positioning device according to the preform through the conveying equipment, and then the preform mouth will be upwards. Loaded on the preform holder and sent to the drying tunnel.

2. After heating, the preform will be sent to the blowing and drawing channel for mold clamping. After the low-pressure and high-pressure blowing and drawing, the gas will be swept away, and finally the mold will be opened, and we will be able to use the channel of the fully automatic blow molding machine. Take off the formed bottle.